SMD FRX Futaba Receiver 3PV, 4PV, 4PM, 4PL, 4PLS, 4PX, 4GRS 7PX, 7PXR, 7XC,10PX (JBR900007)

SMD FRX2 FUTABA T-FHSS COMPATIBLE ANTENNA-FREE RECEIVER

Compatible Transmitters:
FUTABA 10PX
FUTABA 7PX
FUTABA 4PX
FUTABA 7XC
FUTABA 4GRS
FUTABA 4PV
FUTABA 4PM
FUTABA 4PLS
FUTABA 3PV

Features:
1. Futaba 2.4GHz T-FHSS compatible
2. High performance CPU enhance precision control feeling
3. 4 channel support
4. Micro size (25.5x22x17.3 mm)
5. Operating Voltage 3.7V - 8.4V:
6. Weight: 5g

Package Included:
1 x Receiver
1 x Bind cable

Normal mode / High Speed mode:
The " Normal mode " accepts any type of servos or the peripheral. The "High Speed mode" only accepts the digital servos, including BLS series.

FUTABA T-FHSS

MAKE SURE TO SELECT T-FHSS on the modulation menu.

Each transmitter has an individually assigned, unique ID code. In order to start operation, the receiver must be linked with the ID code of the transmitter with which it is being paired. Once the link is made the ID code is stored in the receiver and no further linking is necessary unless the receiver is to be used with another transmitter.

1. Place the transmitter and the receiver close to each other within half (0.5) meter.
2. Place the transmitter into the linking mode and turn on the receiver
3. Plug in BIND cable to receiver, wait 3 seconds then plug out the BIND cable.
4. The LED will begin to blink red. After the receiver LED switches from blinking red to green - red steady light, If the transmitter and receiver are linked normally, set the power switch to the OFF position and then turn on the PWR ON position. If the receiver LED lights green, linking was succeeded.