Description

Hobby Plus 1:18 Micro Evo Crawler "Trail Hunter V2" 2 Speed Camo RTR ( AB 1810303/AB18030)

You do not need much space and the "Playground" is built quickly. For example, just throw a few pillows or on the ground and the fun can begin! The proportional radio remote control makes the finest driving maneuvers possible and control the little crawler over even the most complicated-looking obstacles.

HIGHLIGHTS:-

Portal axles front & rear
Metal gears on front and rear axles
2.4GHz transmitter/receiver unit
Lighting system operated from the transmitter
Oversize 1.2" AT tires with internal bead lock system
Chassis mounted 1kg steering servo with panhard bar
PPX4 water resistant electronics
Metal chassis frame
Painted 1.2mm Lexan body
Tight turning circle of 80cm
Driving time of up to 45 minutes
Steering angle of up to 45Â°
Ultimate ground clearance due to portal axles and 1.2" tires

Due to its design, the "Trail Hunter" chassis has probably the highest ground clearance currently available on the market.

Battery box and on-switch are located on the loading area. Thus, no disassembly of the body is necessary in daily use.

The operation of the standard lighting front and rear consisting of low beam and taillight is done directly on the transmitter by (repeated) actuation of the 3rd channel.

Newly developed portal axle with new drive ratio. This realizes a buttery smooth response at low speed and even more torque. With the new axle, up to 45Â° steering angle is also achieved. The gears in the axles is made of tool steel. CVD drive shafts are installed on the front axle

New* oversized 130 "Crawler Spec"Â brushed motor (100T)
New* developed 2-speed steel gear shiftÂ (switchable on radio CH3)
New extreme portal axles with steel gearsÂ for even more ground clearance
New* motor mountÂ (even for bigger motors like 180 & 240 size)
New* reinforced drive shafts front & rear
New* LCG-optimized chassis layoutÂ (Low Center of Gravity)

and also...

2.4GHz radio system
Vehicle lighting operated from the transmitter (CH4)
Oversize 1.2" AT wheels with internal beadlock system
1kg steering servo with panhard bar
PPX4 water-resistant electronics
Metal chassis frame
Painted 1.2mm Lexan body
Tight turning circle of 80cm
Driving time of up to 45 minutes
Steering angle of up to 45Â°
Maximum ground clearance thanks to portal axels and 1.2" wheels

FEATURES:-

Scale: 1:18
4WD all-wheel drive
2.4GHz radio system
"High Torque" 2-speed steel gears, 1st gear ratio: 98:1 / 2nd gear ratio: 24.5:1(CH4)
100T / 130size brushed motor
Differentials fully locked (front & rear)
Telescopic UJ cardan shafts
Metal chassis frame
Drag/Mountain brake (prevents rolling on hills)
Digital proportional control for sensitive driving maneuvers
LED lighting (CH4)
Scale body with many attachment parts
1.2" bead lock wheels with super soft AT tires
Waterproof 1kg mini steering servo
2-in-1 speed controller/receiver unit
Driving time: approx. 45 minutes
Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
Remote control: 2.4GHz, 4-channel
Steering servo: 1kg actuating force, waterproof
Motor: 100T - 130 oversize
Newly developed 2-speed gears
Steel drive and portal axle gears
Gear ratio: 1st gear: 98:1 / 2nd gear: 24.5:1
Battery: LiPo 7.4V/2S 600mAh
Battery connector system: Molex 2-pin
Wheelbase: 158,5mm
Ground clearance: 43,7mm
Track width: 110mm
Length: 241mm
Width: 125mm
Height: 130,8mm
Weight: 430g (incl. drive battery)
Wheels: 19.5x58mm